Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yamazaki, Takumi*; Hirai, Takamasa*; Yagi, Takashi*; Yamashita, Yuichiro*; Uchida, Kenichi*; Seki, Takeshi*; Takanashi, Koki
Physical Review Applied (Internet), 21(2), p.024039_1 - 024039_11, 2024/02
Times Cited Count：0 Percentile：0.01(Physics, Applied)Nakanoya, Takamitsu; Yoshimoto, Masahiro; Saha, P. K.; Takeda, Osamu*; Saeki, Riuji*; Muto, Masayoshi*
Proceedings of 20th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.937 - 941, 2023/11
In the J-PARC 3GeV Rapid Cycling Synchrotron (RCS), the 400MeV H
beam is changed to H+ beam by a charge exchange foil and accelerated to 3GeV. So far, RCS had used two types of charge exchange foil. One is the HBC (Hybrid Boron mixed Carbon) foil and the other is the Kaneka GTF (Graphene Thin Film). HBC foil is a patented deposition method developed at KEK for the stable production of thick carbon foil. Initially, the RCS used HBC foil produced atKEK. However, in 2017, JAEA had started HBC foil production and has been using it since then. Recently, we have succeeded in depositing thick pure carbon foil, which had been considered difficult to produce by the arc deposition method. As a new challenge, this pure carbon foil was used in the user operation from March 2023. As a result, Pure carbon foils showed less deformation and more stable charge exchange performance than HBC and GTF.
Horiguchi, Naoki; Yoshida, Hiroyuki; Kaneko, Akiko*; Abe, Yutaka*
Nihon Kikai Gakkai Kanto Shibu Dai-29-Ki Sokai, Koenkai Koen Rombunshu (Internet), 5 Pages, 2023/10
To elucidate the behavior of molten fuels as a liquid jet in a shallow pool, which is assumed in a core meltdown accident of an LWR, and develop the evaluation method, we investigated the behavior of the vortical liquid film of the simulated wall-impinging liquid jet using 3-dimensional interface shape data obtained by the experiment in a liquid-liquid system.
Nakayama, Katsumasa*; Suzuki, Kei
Physics Letters B, 843, p.138017_1 - 138017_7, 2023/08
Times Cited Count：0 Percentile：0.02(Astronomy & Astrophysics)The Casimir effect is a quantum phenomenon induced by the zero-point energy of relativistic fields confined in a finite-size system. This effect for photon fields has been studied for a long time, while the realization of counterparts for fermion fields in Dirac/Weyl semimetals is an open question. We theoretically demonstrate the typical properties of the Casimir effect for relativistic electron fields in Dirac/Weyl semimetals and show the results from an effective Hamiltonian for realistic materials such as Cd
As
and NaBi. We find an oscillation of the Casimir energy as a function of the thickness of the thin film, which stems from the existence of Dirac/Weyl nodes in momentum space. Experimentally, such an effect can be observed in thin films of semimetals, where the thickness dependence of thermodynamic quantities is affected by the Casimir energy.
Horiguchi, Naoki; Yoshida, Hiroyuki; Kaneko, Akiko*; Abe, Yutaka*
Physics of Fluids, 35(7), p.073309_1 - 073309_17, 2023/07
Times Cited Count：0 Percentile：0.01(Mechanics)The atomization of a liquid jet in an immiscible liquid-liquid system is significant for the safety in the nuclear industry field. The Japan Atomic Energy Agency has developed an evaluation method of a melt fuel behavior as a liquid jet in an immiscible liquid-liquid system for subsequence using mechanistic numerical simulation and has investigated liquid jet behavior in a shallow pool through numerical simulations and experiments. The paper clarifies the atomization mechanism in the wall-impinging liquid jet. Herein, the atomization behavior in the wall-impinging liquid jet in a shallow pool in an immiscible liquid-liquid system was studied in terms of droplet formation and flow field using numerical simulation and the dispersed-phase tracking method. The results show that the droplet formation in the liquid film flow of the wall-impinging liquid jet had the three patterns, and we obtained the droplet properties immediately after droplet formation and developed the theoretical criterion regions using the dimensionless numbers for droplet formation. We characterized the patterns by comparing them with the regions and elucidated the droplet formation mechanisms depending on their sources. Moreover, we elucidated that the relationship between droplet formation as the local behaviors of the jet and atomization as the whole behavior.
Nakayama, Katsumasa*; Suzuki, Kei
Physical Review Research (Internet), 5(2), p.L022054_1 - L022054_6, 2023/06
The Casimir effect is a fundamental quantum phenomenon induced by the zero-point energy for a quantum field. It is well-known for relativistic fields with a linear dispersion relation, while its existence or absence for nonrelativistic fields with a quadratic dispersion is an unsettled question. Here, we investigate the Casimir effects for various dispersion relations on the lattice. We find that Casimir effects for dispersions proportional to an even power of momentum are absent in a long distance under some types of boundary conditions, while a remnant of the Casimir effect survives in a short distance. The concepts of such absence and remnants of Casimir effect help us to understand observables in finite-size materials with quantum fields on the lattice, such as thin films, narrow nanoribbons, and short nanowires. In terms of this effect, we also give a reinterpretation of the Casimir effect for massive fields.
Nakayama, Katsumasa*; Suzuki, Kei
Proceedings of Science (Internet), 430, p.379_1 - 379_9, 2023/04
The conventional Casimir effect has been studied in the continuous spacetime, but to elucidate its counterpart in the lattice space is an important subject. Here, we discuss various types of Casimir effects for quantum fields on the lattice. By using a definition of the Casimir energy on the lattice, we show that the Casimir effect for the Wilson fermion is similar to that for the continuous Dirac fermion. We apply our definition to an effective Hamiltonian describing Dirac semimetals, such as CdAs and NaBi, and find an oscillatory behavior of the Casimir energy as a function of film thickness of semimetals. We also study contributions from Landau levels under magnetic fields and the Casimir effect for nonrelativistic particle fields on the lattice.
Ikeda, Yusuke*; Matsumura, Daiju; Tsuji, Takuya; Namai, Asuka*; Imoto, Kenta*; Tokoro, Hiroko*; Nakabayashi, Koji*; Okoshi, Shinichi*
Inorganica Chimica Acta, 550, p.121434_1 - 121434_8, 2023/03
Times Cited Count：0 Percentile：0.01(Chemistry, Inorganic & Nuclear)Kumada, Takayuki; Miura, Daisuke*; Akutsu, Kazuhiro*; Oku, Takayuki; Torikai, Naoya*; Niizeki, Tomotake*
Hamon, 32(4), p.165 - 168, 2022/11
We demonstrated the advantage of spin-contrast-variation neutron reflectometry on the structure analysis of buried interface between resin and porous silica layers. The interface structure was not reproduced by the normal Gaussian model, but by the asymmetric interface model where crosslinked polymer chains neither permeate the pore nor follow the surface roughness of the silica layer.
Kumada, Takayuki; Miura, Daisuke*; Akutsu, Kazuhiro*; Oishi, Kazuki*; Morikawa, Toshiaki*; Kawamura, Yukihiko*; Suzuki, Junichi*; Oku, Takayuki; Torikai, Naoya*; Niizeki, Tomotake*
Journal of Applied Crystallography, 55(5), p.1147 - 1153, 2022/10
Times Cited Count：1 Percentile：27.54(Chemistry, Multidisciplinary)Spin-contrast-variation neutron reflectivity obtains multiple reflectivity curves from a single sample and a single beam source. We used the strong point of the technique to reveal that, although methylated-perhydropolysilazane-derived silica layer has a higher porosity near the interface with acrylic urethane resin, the resin did not permeate the pore network.
Momma, Yuichiro*; Sakairi, Masatoshi*; Ueno, Fumiyoshi; Otani, Kyohei
Zairyo To Kankyo, 71(5), p.133 - 137, 2022/05
The effect of the corrosion inhibitor on the corrosion of steel under a thin solution layer was investigated. As a result of forming a thin solution layer with a thickness of 1.0-0.2 mm on the specimen, adding a mixed solution of sodium molybdate and aluminum lactate as a corrosion inhibitor, and performing electrochemical measurement, the corrosion inhibitor suppresses the anodic reaction. And in the thin solution layer, it was suggested that the morphology of the protective layer structure by the corrosion inhibitor changed according to the amount of liquid as compared with the bulk immersion.
Kakiuchi, Takuhiro*; Matoba, Tomoki*; Koyama, Daisuke*; Yamamoto, Yuki*; Yoshigoe, Akitaka
Langmuir, 38(8), p.2642 - 2650, 2022/03
Times Cited Count：1 Percentile：13.58(Chemistry, Multidisciplinary)0xidation processes at the interface and the surface of Si(111) substrate with thin Hf films were studied using photoelectron spectroscopy in conjunction with supersonic oxygen molecular beams (SOMB). The oxidation starts at the outermost Hf layers and produces stoichiometric HfO
. Hf silicates (Hf-O-Si configuration) were generated in the vicinity of the HfO/Si interface in the case of the irradiation of 2.2 eV SOMB. The oxidation of the Si substrate takes place to generate SiO compounds. Si atoms were emitted from the SiO/Si interface region underneath the HfO overlayers to release the stress generated within the strained Si layers. The emitted Si atoms can pass through the HfO overlayers and react with the impinging O gas.
Otani, Kyohei; Kato, Chiaki
Zairyo To Kankyo, 70(12), p.480 - 486, 2021/12
This is a comprehensive paper of the corrosion of carbon steel in air/solution alternating condition. From cross-sectional observation and analysis of the iron rust layer formed on the surface of carbon steel in the alternating condition, it was found that a multilayered iron rust layer composed of red rust layer (
-FeOOH), rust crust layer (Fe
O
), inner crystal (FeO), and inner rust layer was formed on carbon steel. The multi-layered iron rust layer would accelerate the cathodic oxygen reduction reaction, and the reason why the corrosion rate of the carbon steel in the alternating condition was accelerated. The effect of artificial seawater (ASW) composition on the corrosion rate of carbon steel in air/solution alternating condition was investigated. It was found that the corrosion rate increased with increasing concentration from pure water to 200 times diluted ASW, and decreased with increasing concentration from 20 times diluted ASW to no diluted ASW. The Mg and Ca ions in ASW precipitated on the reaction interface and formed a metal cation layer, which inhibited the oxygen reduction reaction, and thus the corrosion of carbon steel was inhibited in the highly concentrated ASW.
VAl/Fe layered films showing exchange biasKubota, Takahide*; Shimada, Yusuke*; Tsuchiya, Tomoki*; Yoshikawa, Tomoki*; Ito, Keita*; Takeda, Yukiharu; Saito, Yuji; Konno, Toyohiko*; Kimura, Akio*; Takanashi, Koki*
Nanomaterials (Internet), 11(7), p.1723_1 - 1723_11, 2021/07
Times Cited Count：2 Percentile：17.05(Chemistry, Multidisciplinary)
in NaClAoyama, Takahito; Ogawa, Hiroaki; Kato, Chiaki; Ueno, Fumiyoshi
Metals, 11(3), p.511_1 - 511_13, 2021/03
Times Cited Count：3 Percentile：24.75(Materials Science, Multidisciplinary)The effect of Cu in bulk solution on pitting corrosion resistance of extra high purity type 316 stainless steel was investigated. Pitting occurred in 0.1 M NaCl-1 mM CuCl whereas pitting was not initiated in 0.1 M NaCl. Although deposition of Cu on the surface occurred regardless of potential region in 0.1 M NaCl-1 mM CuCl, Cu in bulk solution had no influence on the passive film formation. The decrease in pitting corrosion resistance in 0.1 M NaCl-1 mM CuCl resulted from the deposited Cu or Cu compound and continuous supply of Cu
on the surface.
Kumada, Takayuki; Miura, Daisuke*; Akutsu, Kazuhiro*; Suzuki, Junichi*; Torikai, Naoya*
Hamon, 30(4), p.207 - 211, 2020/11
We developed a technique of spin-contrast-variation neutron reflectivity (SCV-NR) for structural analyses of multilayer films. The SCV-NR curves of the polystyrene monolayer film were precisely reproduced using a common set of structural parameters and neutron scattering length density at each proton polarization. This result ensures that SCV-NR curves are not deformed by inhomogeneous PH due to the spin-diffusion mechanism. The number of structural parameters of the lamellar microphase-separated poly(styrene-block-isoprene) thin film is too large to determine with a single unpolarized reflectivity curve only. However, these parameters converged through the global analysis of the SCV-NR curves. In this manner, SCV-NR determines the structure of multilayer films while excluding the incorrect structural model that accidentally accounts for a single unpolarized reflectivity curve only.
7 surface using high-resolution core-level photoelectron spectroscopyKakiuchi, Takuhiro*; Matoba, Tomoki*; Koyama, Daisuke*; Yamamoto, Yuki*; Kato, Daiki*; Yoshigoe, Akitaka
Surface Science, 701, p.121691_1 - 121691_8, 2020/11
Times Cited Count：1 Percentile：5.82(Chemistry, Physical)Ultrathin hafnium films on Si(111)-77 were studied using synchrotron radiation photoelectron spectroscopies to reveal the chemical states at interface and surface. Ultrathin Hf layers grow on clean Si(111)-77 surface by lever rule. Surface and interface of Hf/Si(111) contain three components (metallic Hf layers, Hf monosilicide (HfSi) and Si-rich Hf silicide). Ultrathin Hf layers changes HfSi islands on bared Si(111)-77 surface after annealing at 1073 K. It was found that the long axes of the rectangle islands expand the direction connecting the corner holes in DAS model of clean Si(111)-77 surface.
Daimon, Shunsuke*; Uchida, Kenichi*; Ujiie, Naomi*; Hattori, Yasuyuki*; Tsuboi, Rei*; Saito, Eiji
Applied Physics Express, 13(10), p.103001_1 - 103001_4, 2020/10
Times Cited Count：7 Percentile：43.4(Physics, Applied)Otani, Kyohei; Tsukada, Takashi; Ueno, Fumiyoshi; Kato, Chiaki
Zairyo To Kankyo, 69(9), p.246 - 252, 2020/09
The purpose of this study was to investigate the effect of artificial sea water concentration on the corrosion rate of carbon steel under air/solution alternating condition, and to clarify the corrosion mechanism of carbon steel that changes with artificial seawater concentration. Mass measurements showed that the corrosion rate of carbon steel in the alternating condition accelerates with increasing concentration in the concentration region between deionized water to 200 times diluted artificial seawater (ASW), and the corrosion rate decreases with increasing concentration in the concentration region between 20 times diluted ASW to undiluted ASW. It can be considered that the reason why the carbon steel corrosion was suppressed in highly concentrated artificial seawater would Mg ions and Ca ions in the artificial seawater precipitate and cover on the surface due to the increase in pH near the surface by oxygen reduction reaction.
Se ultrathin films on van der Waals ferromagnet CrSiTe
Kato, Takemi*; Sugawara, Katsuaki*; Ito, Naohiro*; Yamauchi, Kunihiko*; Sato, Takumi*; Oguchi, Tamio*; Takahashi, Takashi*; Shiomi, Yuki*; Saito, Eiji; Sato, Takafumi*
Physical Review Materials (Internet), 4(8), p.084202_1 - 084202_6, 2020/08
Times Cited Count：4 Percentile：20.11(Materials Science, Multidisciplinary)
